ICC M1 Residential Mechanical Inspector Certification Exam Course!

Pass the M1 Residential Mechanical Inspector certification exam!

Complete our self-paced Mechanical Inspector Training Course then take your actual ICC online exam via ICC PRONTO. Rapidly become ICC certified without ever having to leave the comfort of your home or office.

Refresh your IRC code knowledge, successfully pass your ICC M1 Certified Mechanical Inspector Exam. Our comprehensive interactive Building Inspector exam preparation program is your best, most affordable path to guarantee ICC certification!

Many home inspectors additionally use ICC M1 Residential Mechanical Certification as a crucial part of their Home Inspector Certification portfolio.

$169.00

Add to cart
Category:

Course Outline

Get your ICC M1 Residential Mechanical Inspector Certification. Review everything needed to PASS THE ICC M1 EXAM. Our 100% money-back guarantee backs this course.

First, Read our “Navigating the IRCA Code Primer – For ICC M1 Residential Mechanical Inspectors”. This manual will familiarize you with the structure of the code contained within chapters 1-2 & 12-24 of the IRC.

Next, our “Residential Mechanical Instructor Study Guideprovides over 400 practice questions.

Finally, our “Online Study Center” allows you to study specific questions and answers as well as take multiple practice exams. These appear as Book Study Mode ● Flash Card Mode ● Chapter Test Mode ● and Exam Simulation Mode. Final exams consist of full-length, timed practice tests similar to the ICC exam.


TEXTBOOK – NAVIGATING THE IRC: A Code Primer – For ICC M1 Residential Mechanical Inspectors:

Our “NAVIGATING THE IRC” manual helps students review the (IRC) International Residential Code. The manual focuses specifically on the relationship of the IRC to the M1 Certification Exam. If you master the code, you master the exam!

This manual covers the use, layout, and content of chapters 1-2 & 12-24 of the 2015 IRC. This manual is the starting point for the TLC ICC Certification Training Program.

ONLINE – THE RESIDENTIAL MECHANICAL INSPECTOR STUDY GUIDE:

The “Residential Mechanical Inspector Study Guide” provides over 400 practice questions related to the Mechanical Inspector exam. Practice questions come from the 2015 IRC – International Residential Code published by the ICC.


FAST-TABS – Approved quick reference tabs for your IRC codebook:

Fast-Tabs help you navigate the IRC quickly and efficiently.

QUICK-CARD – Quick lookup cheat-sheet of key IRC codes:

This 6-page laminated card places IRC essentials at your fingertips.


ONLINE STUDY CENTER: Book Study Mode – Flash Card Study Mode – Chapter Test Mode – Exam Simulation Mode

Access practice questions & simulated exams from any device with internet access! Online features include virtual flashcards, 400+ practice questions, chapter exams, & mock final exams.

Our “Online Study Center” allows you to focus your study time by reviewing only the unfamiliar questions. Mark questions you know as DONE, and they will appear only on the mock final exams. Practice exams also provide additional feedback on questions answered incorrectly.

SIMULATED ONLINE EXAMS: Chapter tests and final exams allow you to check your progress while you master our study material. M1 Practice tests provide real-time feedback and allow you to concentrate only on subjects needing improvement. Practice exams help you rapidly gain confidence and knowledge to pass your ICC Certification Test effortlessly.

ONE YEAR ONLINE ACCESS: 1-year full access membership to our Online Study Center. Conveniently study in your home or office without wasting valuable time commuting to a classroom. Our program is a reliable and affordable way to pass your M1 Residential Mechanical Inspectors exam at home online.

ICC M1 Residential Mechanical Inspector Certification Course
Pass the ICC M1 exam the first time you test with our ICC Exam prep course.

 

THIS PROGRAM REQUIRES YOU TO HAVE A COPY OF THE 2015 (IRC) INTERNATIONAL RESIDENTIAL CODE. IF YOU DO NOT OWN A COPY OF THE CODEBOOK, YOU SHOULD ACQUIRE ONE IMMEDIATELY.

ICC M1 Course Breakdown

TEXTBOOK – NAVIGATING THE IRC: A Code Primer – For ICC M1 Residential Mechanical Inspectors

Designed specifically for the M1 Residential Mechanical Inspector course. This manual familiarizes you with the use, layout, and content of chapters 1-2 and 12-24 of the 2015 IRC. The manual also provides a comprehensive review of study questions similar to those found on the ICC M1 Exam.

Textbook includes

  • The purpose and layout of the code
  • How to navigate the IRC
  • Code reference exercises, speed drills
  • Exam Breakdown
  • Using the Table of Contents
  • Breaking down questions by subject (Chapters 1-2 and 12-24)
    • Keyword Identification, how to Identify the subject of an exam question for easy reference.
    • How to search for a code article by referencing the INDEX
    • Code reference example questions with in-depth solutions.

TEXTBOOK – 2015 M1 Residential Mechanical Inspector Study Guide:

The M1 Exam Study Guide covers chapters 12-24 of the IRC 2015 edition. The M1 Exam Study Manual provides you with 400+ practice questions specific to the M1 Exam from Chapters 12-24.

FAST-TABS for the 2015 IRC

Navigate the IRC quickly and efficiently. Fast-tabs are a must-have item for IRC users and can dramatically lower the time spent searching through the codebook. Furthermore, you are allowed by ICC to use a tabbed codebook when taking your M1 Exam!

QUICK-CARD for the 2015 IRC

This 6-page laminated card places IRC essentials at your fingertips. Quick-Card compiles Building, Mechanical, Plumbing, Fuel Gas, and Electrical requirements for the 2015 International Residential code into one easy reference.

Sections also include:

Footings ● Floor Framing ● Wall Framing ● Masonry Walls ● Roof Framing ● Interior Dimensions ● Means of Egress ● Smoke Alarms ● HVAC ● Plumbing ● Electrical.

ONLINE STUDY CENTER

Study exam questions and take simulated practice exams from any device with internet access.

Features include

  • All practice questions (For M1 Mechanical Inspector course)
  • Virtual flashcards,
  • Chapter tests,
  • Simulated final exams. (60 Questions, 120 Minute Time Limit, 75%+ to pass)
  • Missed question reports – Practice questions provide feedback on problems you answer incorrectly.
  • All students receive a 1-year membership in our online study center.

THIS PROGRAM REQUIRES YOU TO HAVE A COPY OF THE 2015 (IRC) INTERNATIONAL RESIDENTIAL CODE. IF YOU DO NOT OWN A COPY OF THE CODEBOOK, YOU SHOULD ACQUIRE ONE IMMEDIATELY.

ICC M1 Exam Content

M1 EXAM: 60 QUESTIONS – 2 HOUR TIME LIMIT – OPEN BOOK EXAM – 75%+ TO PASS

General Administration 10%

  • Project Administration – 2%
  • Public Information and Legal – 3%
  • Manufacturer’s Installation Instructions -5%

Heating/Cooling/Water Heaters 25%

  • Heating Equipment – 10%
  • Water Heaters and Boilers – 4%
  • Cooling and Refrigeration – 5%
  • Other Systems – 3%
  • Heat Pumps and Solar Thermal Energy – 3%

Exhaust and Ventilation Systems 8%

  • Exhausts, Fans, and Kitchen Range Hoods – 3%
  • Clothes Dryer Exhaust – 5%

Duct-Systems 8%

  • Duct Construction and Installation – 3%
  • Duct and Plenum Use and Application – 5%

Combustion Air 19%

  • Combustion Air 19%

Chimneys and Vents 18%

  • Venting of Fuel-Burning Appliances – 7%
  • Chimney and Vent Connectors – 6%
  • Factory-Built Chimneys and Fireplaces – 3%
  • Masonry Chimneys and Fireplaces – 2%

Fuel-Supply Systems 15%

  • Fuel Supply Installation and Sizing 8%
  • Fuel System Connections – 5%
  • Oil Piping and Storage – 2%

M1 certified Residential Mechanical Inspector responsibilities include the following.

  • Inspecting the installation, maintenance, alteration of mechanical systems that are installed and utilized to provide control of environmental conditions and related process for one-and-two family dwellings not more than three stories in height.
  • Verify the installation of fuel gas distribution piping and equipment, fuel-gas-fired appliances, and fuel gas-fired appliance wiring.
  • Determine compliance with the Building Codes and Standards adopted by their jurisdiction.

Codebook - 2015 IRC

2015 IRC SOFTCOVER 

You must have a copy of the 2015 IRC to use this program!

Pass the ICC B1, M1, P1, and E1 Exam. The ICC Inspector Certification exam is an open book test.

You must possess a copy of the 2105 IRC when taking your ICC B1, M1, P1, and E1 Residential Inspector Exams.

$144.00

Add to cart
Category:

Course Outline

the 2015 IRC is a REQUIRED CODEBOOK for 2015, B1, M1, P1, and E1 Residential Building Inspector Exams.

This comprehensive code compiles all building, plumbing, mechanical, fuel gas and electrical requirements for non-commercial one- and two-family dwellings in one convenient code. The regulations cover dwellings and townhouses up to three stories.

  • The 2015 IRC® contains many important changes including:
  • Common walls separating townhouses must now be rated for 2 hours when an automatic fire sprinkler system is not installed.
  • Remodeling of an existing basement does not trigger the emergency escape and rescue opening requirements unless a new bedroom is created.
  • Ramps that do not serve the required egress door are now permitted to have a slope not greater than 1 unit vertical in 8 units horizontal.
  • Carbon monoxide alarms now require connection to the house wiring system with battery backup. A carbon monoxide alarm is required in bedrooms when there is a fuel-
  • fired appliance in the bedroom or adjoining bathroom.
  • Revised lumber capacities have changed the span lengths for floor joists, ceiling joists, and rafters in the prescriptive tables of the IRC.
  • New sections and tables provide prescriptive methods for posts, beams, joists, and connections in deck construction.
  • The girder and header span tables of Chapter 5 have been moved into Chapter 6. Multi-ply and single header tables are combined. A new section describing rim board headers is added.

ISBN-10: 1609834704
ISBN-13: 978-1609834708

Free ICC M1 Practice Quiz

Ten Free ICC M1 Residential Mechanical Inspector Exam Questions:

Pass this free ICC M1 exam to glimpse where you stand! These sample Residential Mechanical Inspector practice questions are similar to the ones you will encounter when taking your actual ICC Certification exam.

If you readily answer eight or more of these practice questions correctly, congratulations, you are in pretty good shape.

However, if you miss three or more questions, you are in danger of failing your ICC M1 Residential Mechanical Inspector Exam.

 

Self-contained refrigeration systems containing _____ or less of refrigerant do not require a permit.

Correct! Wrong!

Exemption from permit requirements of this code shall not be deemed to grant authorization for any work to be done in any manner in violation of the provisions of this code or any other laws or ordinances of this jurisdiction. Permits shall not be required for the following:

Mechanical:
7. Self-contained refrigeration systems containing 10 pounds (4.54 kg) or less of refrigerant or that are actuated by motors of 1 horsepower (746 W) or less.

2015 IRC R105.2 Work exempt from permit.
Section R105, Permits.
Chapter 1, Scope and administration.

If the enforcement of a code provision violates the conditions of the listing of a _____, then the conditions of the listing and manufacturer's instructions must apply.

Correct! Wrong!

The codes and standards referenced in this code shall be considered part of the requirements of this code to the prescribed extent of each such reference and as further regulated in Sections R102.4.1 and R102.4.2.

Exception: Where enforcement of a code provision would violate the conditions of the listing of the equipment or appliance, the conditions of the listing and manufacturer's instructions shall apply.

2015 IRC R102.4 Referenced codes and standards.
Section R102, Applicability.
Chapter 1, Scope and administration.

Strapping of appliances in seismic areas must be designed so that the strapping at the lower point maintains a min. distance of ____ above the controls.

Correct! Wrong!

Appliances designed to be fixed in position shall be fastened or anchored in an approved manner. In Seismic Design Categories D0, D1 and D2, and in townhouses in Seismic Design Category C, water heaters and thermal storage units shall be anchored or strapped to resist horizontal displacement caused by earthquake motion in accordance with one of the following:

1. Anchorage and strapping shall be designed to resist a horizontal force equal to one-third of the operating weight of the water heater storage tank, acting in any horizontal direction. Strapping shall be at points within the upper one-third and lower one-third of the appliance's vertical dimensions. At the lower point, the strapping shall maintain a minimum distance of 4 inches (102 mm) above the controls.

2. The anchorage strapping shall be in accordance with the appliance manufacturer's recommendations.

2015 IRC M1307.2 Anchorage of appliances.
Section M1307, Appliance Installation.
Chapter 13, General mechanical system requirements.

In vented floor furnaces, the furnace register must be located a min. of _____ from doors in any position, draperies or similar combustible objects.

Correct! Wrong!

Location of floor furnaces shall conform to the following requirements:

3. The furnace register shall be located not less than 12 inches (305 mm) from doors in any position, draperies or similar combustible objects.

2015 IRC M1408.3 Location.
Section M1408, Vented floor furnaces.
Chapter 14, Heating and cooling equipment and appliances.

Piping for a secondary drain or auxiliary drain pan required for a cooling or evaporator coil, must maintain a min. horizontal slope in the direction of discharge a min. of _____.

Correct! Wrong!

In addition to the requirements of Section M1411.3, a secondary drain or auxiliary drain pan shall be required for each cooling or evaporator coil where damage to any building components will occur as a result of overflow from the equipment drain pan or stoppage in the condensate drain piping. Such piping shall maintain a minimum horizontal slope in the direction of discharge of not less than 1/8 unit vertical in 12 units horizontal (1-percent slope). Drain piping shall be not less than 3/4-inch (19 mm) nominal pipe size.

2014 M1411.3.1 Auxiliary and secondary drain systems.
Section M1411, Heating and cooling equipment.
Chapter 14, Heating and cooling equipment and appliances.

Clothes dryer exhaust ducts must not be joined with screws that protrude more than _____ into the inside of the duct.

Correct! Wrong!

Exhaust ducts shall be supported at intervals not to exceed 12 feet (3658 mm) and shall be secured in place. The insert end of the duct shall extend into the adjoining duct or fitting in the direction of airflow. Exhaust duct joints shall be sealed in accordance with Section M1601.4.1 and shall be mechanically fastened. Ducts shall not be joined with screws or similar fasteners that protrude more than 1/8 inch (3.2 mm) into the inside of the duct.

2015 IRC M1502.4.2 Duct installation.
Section M1502, Clothes dryer exhaust.
Chapter 15, Exhaust systems.

Metal ducts in underground duct systems must be protected from corrosion in an approved manner or must be completely encased in concrete a min. of _____ thick.

Correct! Wrong!

Underground duct systems shall be constructed of approved concrete, clay, metal or plastic. The maximum duct temperature for plastic ducts shall not be greater than 150°F (66°C). Metal ducts shall be protected from corrosion in an approved manner or shall be completely encased in concrete not less than 2 inches (51 mm) thick. Nonmetallic ducts shall be installed in accordance with the manufacturer's instructions. Plastic pipe and fitting materials shall conform to cell classification 12454-B of ASTM D 1248 or ASTM D 1784 and external loading properties of ASTM D 2412. Ducts shall slope to an accessible point for drainage. Where encased in concrete, ducts shall be sealed and secured prior to any concrete being poured. Metallic ducts having an approved protective coating and nonmetallic ducts shall be installed in accordance with the manufacturer's instructions.

2015 IRC M1601.1.2 Underground duct systems. Section M1601, Duct Construction. Chapter 16, Duct Systems.

Return air openings for heating, ventilation and air conditioning systems must be located a min. of _____ from an open combustion chamber or draft hood of another appliance in the same room or space.

Correct! Wrong!

Return air openings for heating, ventilation and air conditioning systems shall comply with all of the following:

1. Openings shall not be located less than 10 feet (3048 mm) measured in any direction from an open combustion chamber or draft hood of another appliance located in the same room or space.

2015 IRC M1602.2 Return air openings.
Section M1602, Return air.
Chapter 16, Duct system.

The horizontal run of an uninsulated connector to a natural draft chimney must not exceed what percentage of the height of the vertical portion of the chimney above the connector?

Correct! Wrong!

The horizontal run of an uninsulated connector to a natural draft chimney shall not exceed 75 percent of the height of the vertical portion of the chimney above the connector. The horizontal run of a listed connector to a natural draft chimney shall not exceed 100 percent of the height of the vertical portion of the chimney above the connector.

2015 IRC M1803.3.2 Length
Section M1803, Chimney and vent connectors.
Chapter 18, Chimney and vents.

Unless otherwise specified, gas piping systems installed underground must be at least ______ inches below grade.

Correct! Wrong!

Underground piping systems shall be installed a minimum depth of 12 inches (305 mm) below grade, except as provided for in Section G2415.12.1.

2015 International Residential Code
Part VI - Fuel Gas
Chapter 24, Fuel Gas
Section
- G2415 (404) Piping System Installation
- G2415.12 (404.12) Minimum burial depth.

You may also need…

Go To Cart